Actions

Fusion360 Tutorials: Difference between revisions

From Rabbi Blog

Line 19: Line 19:
** Turn on ''Auto project edges on reference'' and turn off ''Auto look at sketch''
** Turn on ''Auto project edges on reference'' and turn off ''Auto look at sketch''
** You'll need this on the [https://www.youtube.com/watch?v=6yPKMSb6ja8&list=PLrZ2zKOtC_-DR2ZkMaK3YthYLErPxCnT-&index=4&t=0s Lego Brick] Tutorial
** You'll need this on the [https://www.youtube.com/watch?v=6yPKMSb6ja8&list=PLrZ2zKOtC_-DR2ZkMaK3YthYLErPxCnT-&index=4&t=0s Lego Brick] Tutorial
* If you can't select a circle\surface\etc, make sure it is flat (see Constraints)
** Could not select the top of the beer bottle


[[Category:3D Printing]]
[[Category:3D Printing]]

Revision as of 10:38, 3 July 2020

Beginner

by Product Design Online

30 Days

  1. Lego Brick (see notes)
    • shell (hollow), extrude, pattern (rectangle) duplication, circle, line (draft)
  2. Beer Bottle
    • reference image, fit point spline, revolve, glass appearance

Misc

Notes

  • Constraints
    • Horizontal\Vertical - make line(s) the same length. Click the H\V, then the end point of the line to be changed, then the reference point.
  • If tangent circles don't show up: Auto Project Preferences
    • Turn on Auto project edges on reference and turn off Auto look at sketch
    • You'll need this on the Lego Brick Tutorial
  • If you can't select a circle\surface\etc, make sure it is flat (see Constraints)
    • Could not select the top of the beer bottle