Actions

Distant Screws II Challenge Coin: Difference between revisions

From Rabbi Blog

Line 16: Line 16:
     Scale to 60mm x 60mm x 8mm (or 10mm)
     Scale to 60mm x 60mm x 8mm (or 10mm)
     Super Quality
     Super Quality
    No Infill


1) With trees:  On an edge - will require sanding and clean up.
1) With trees:  On an edge - will require sanding and clean up.
Line 31: Line 30:
Created by RabbiBob 3/1/2021
Created by RabbiBob 3/1/2021
w/ Blender 2.9.x
w/ Blender 2.9.x


==Download==
==Download==

Revision as of 17:31, 3 March 2021

Heads: Logo + Distant Screws II Jan\Apr 3307 53.2K (light years)
Tails: Evelyn's Star + The expedition route (Ross310 -> Evelyn's Light -> Colonia -> Qama)

About

Placeholder

ReadMe

A how-to for printing the 3D LS DS II Challenge Coin for anyone that was on the 2021 Distant Screws II Expedition.

The front-side features the classic LS Logo, the expedition name, dates and the waypoint distances traveled.

The backside features the four points of the journey (ROSS310-EVELYNS LIGHT-COLONIA-QAMA) and a star to honor Evelyn Faye Roy.


Printing Suggestions

    Scale to 60mm x 60mm x 8mm (or 10mm)
    Super Quality

1) With trees: On an edge - will require sanding and clean up. 2) In halves:

    Duplicate the STL on the bed
    Sink both below the bed to 1/2 the Z width (-4mm or -5mm)
    Flip one of the faces
    Print
    Glue together
    Sand edge as needed with 220g and 500+



Created by RabbiBob 3/1/2021 w/ Blender 2.9.x

Download

Directions