Actions

Fusion360 Tutorials

From Rabbi Blog

Beginner

by Product Design Online

30 Days

Note: Attempting to render and post to this collection when completed: https://imgur.com/gallery/m5yrdDL

  1. Lego Brick (see notes)
  2. Beer Bottle
  3. Paper Clip
  4. Whiskey Bottle
    • Offset planes, loft, loft guide rails, construction sketch lines, shell (hollow), threads (check model if printing), rectangle (centered)
    • https://imgur.com/gallery/tFzSH5G
  5. Ice Cube Tray
  6. Hex Nut
    • polygon sketch tool, create a midplane, use the mirror feature, and use the hole feature
    • Notes: orientation is now different in F360 (ZY). Lines to be drawn off of a plane (I could not get it to work exactly has he did it).
    • https://imgur.com/gallery/GbaFXG6
  7. Handle Bar with embossed lettering
  8. Door Stop
  9. Light Bulb
  10. iPhone Case
    • How to upload files, how to use the extend sketch feature, how to project a sketch, and how to export your .STL file for 3D printing.
    • Pending

Misc

Notes

  • Constraints
    • Horizontal\Vertical - make line(s) the same length. Click the H\V, then the end point of the line to be changed, then the reference point.
  • If tangent circles don't show up: Auto Project Preferences
    • Turn on Auto project edges on reference and turn off Auto look at sketch
    • You'll need this on the Lego Brick Tutorial
  • If you can't select a circle\surface\etc, make sure it is flat (see Constraints)
    • Could not select the top of the beer bottle